Bearings, Seals, & Hardware For Your L-series Tractor!

Bearings, Seals, &
Hardware for Gravelys

We are happy to supply L-series owners with high-quality Bearings, Seals, and Hardware for their walkbehind tractors and attachments. Below, please find a listing of what we offer at this time, and be sure and check back often, because we are expanding this section of our parts business rapidly.

BEARINGS AND SEALS :

Original Part #:	1972 Part #:	OUR PART #:	Description:	Price Each:	Purchase:
N/A	N/A	BSK-1	Bearing and Seal Kit For Vertical Shaft On MA-106 Drive Unit Used On 30" and 40" Mower Decks Includes: (1) #13146 Upper Bearing (cone) (1) #13145 Upper Race (cup) (1) #13142 Lower Bearing (cone) (1) #13139 Lower Race (cup) (1) #13171 Lower Oil Seal	$90.00
N/A	N/A	BSK-2	Bearing and Seal Kit For Horizontal Shaft On MA-106 Drive Unit Used On 30" and 40" Mower Decks Includes: (2) #13144 Bearings (cones) (2) #13143 Races (cups) (2) #13122 Oil Seals	$100.00
	13122	13122	Seal Kit For Horizontal Shaft On MA-106 Drive Unit Used On 30" and 40" Mower Decks	$15.00
N/A	13171	13171	Lower Oil Seal For Vertical Shaft On MA-106 Drive Unit - Used On 30" & 40" Mower Decks -	$15.00
L-126-A	13491	13491	Bearing Cap Seal Kit Note: Original double-lipped style is no longer available. We supply two single-lipped with installation instructions so as to perform the same function. Price listed is for TWO seals, which are needed for ONE SIDE.	$15.00 per pair
L-412	12622	12622	(Magneto) Cam Shaft Oil Seal	$6.00
L-221-A (also listed as L221-A)	N/A	L-221-A	1-5/8" Axle Seal Kit for Model L Tractors Note: Older tractors (pre 1963) seal OD is 1-5/8". Newer tractors (1963 and later) may use 1-1/2" OD seals. Check size before ordering. Original double-lipped style is no longer available. We supply two single-lipped with installation instructions so as to perform the same function. Price listed is for TWO seals, which are needed for ONE SIDE.	$16.00
	12590		1-1/2"Axle Seal Kit for Model L Tractors Note: Older tractors (pre 1963) seal OD is 1-5/8". Newer tractors (1963 and later) may use 1-1/2" OD seals. Check size before ordering. Original double-lipped style is no longer available. We supply two single-lipped with installation instructions so as to perform the same function. Price listed is for TWO seals, which are needed for ONE SIDE.	$16.00
	13593	13593	Oil Seal Kit For Rotary Plow Note: Original double-lipped style is no longer available. We supply two single-lipped with installation instructions so as to perform the same function. FOUR seals are required for a complete overhaul of drive unit. Price listed is for TWO seals.	$28.00
L-115	12984	12984	Timing Pinion Bearing	$10.00
L-416	12626	12626	Idler Gear Bearing	$5.00
		SWB1	Sulky Wheel Bearing Set Economy (requires 4: price is for a full set of 4)	$10.00 (set of 4)
		SWB2	Sulky Wheel Bearing Set Premium (requires 4: price is for a full set of 4)	$28.00 (set of 4)
	5139	5139	Fan Bearing Set (price is for the two required)	$16.00
		FW-1	FAN WRENCH FOR MODEL L TRACTORS Our new FAN WRENCH is a real time and knuckle saver! Constructed of 3/32"-thick stamped steel, this new wrench is offset and the handle is long, so you can get your hand on it without busting your knuckles. Powder-coated. American-Made. GET YOURS TODAY!	$20.00
	12493	12493	Starter Clutch Bearing Price Is For One. Unit Uses 2	$16.00

HARDWARE :

Image:	Original Part #:	1972 Part #:	OUR PART #:	Description:	Price Each:	Purchase:
None	154-S & 155-S		180082 & 180087	Head Bolt Set - Stainless Steel For Engines WITHOUT Top Air Deflectors. Factory Length: (12) 1-3/8" Long.	$10.00
None	154-S & 155-S		180082 & 180087	Head Bolt Set - Stainless Steel For Engines WITH Top Air Deflectors. Factory Lengths: (10) 1-3/8" Long, & (2) 2" Long,	$10.00
	8280	8280	GT8280	Hood Bumper Kit - Improved Design - For Convertible & Super Convertible Hoods. Includes Hardware.	$12.00
	L-826	12708		Spark Plug Wire Standoff Bracket - Unfinished. Includes high-temperature grommet -	$3.50
	L-827	12325	12325	Spark Plug Wire Grommet - For Bracket Shown Above. High-Temperature Material -	$2.00
		12325	12325	Attachment Clutch Control Rod Grommet - IMPROVED FOR EASIER OPERATION -	$1.75
			DS-1	Air Deflector Screws *- Sold In Pairs -*	$1.00 (2 screws)
	L-840	12713		Top Air Deflector Spacers - Sold In Pairs -	$1.00
			8260	Handle Bar Cable Clip *Correct Size. Identical To Original.*	$1.75
	RO-325	20626	20626	Thick Spacer aka Loose Collar, 5/32" x 2-1/4" Used to adjust blade cutting height on 30" Mower Deck.	$3.00
	RO-324	12858	12858	Thin Spacer aka Loose Collar, 1/8" x 3" Goes between blade & nut on 30" Mower Deck. Can also be used to adjust blade cutting height.	$3.00
		451543	451543	Nut for bottom of 30" Mower vertical shaft	$3.00
		13573	13573	Hood Clips for Super Convertible (sold in pairs)	$6.00 per pair
	EWN-4C	10413	10413	Air Cleaner Hold Down Wing Nut - Nylock Type. Fits All Models -	$1.00
	227-N	13412	13412	Locknut, 5/8 x 18, Grade 5 Half-height, as original. Fits Safety Clutch Shaft, Sulkey Axle, & Tractor Axle.	$1.00
		71716	71716	Throttle Cable Bracket & Speed Clip - Used on L-series engines w/ governors -	$7.50
		7331	7331	Speed Clip (holds throttle cable to bracket)	$4.50
		12138	12138	Governor Spring - American Made -	$6.00